# Minimum Wire Size For 150 Amp Service

Minimum Wire Size For 150 Amp Service. 200 amps #2/0 awg #4/0 awg: Going back to the example i share above, if we simply bump the load to 125a, you’ll already need a 2/0 aluminum wire instead, which is obviously entirely different from the 125 amp wire size copper i mentioned.

4/0 al @ 75 deg is good up to 180 amps [see nec table 310.15(b)(16)]. The number of devices connected to the circuit usually determines how much current will flow. Our calculator yields results that are within.

### This Is Very Acceptable For A 240Volt Feed Where It Is Recommend To Stay Below 7.2%.

For 200 amp service entrance, less than 150' long, conduit shall be 3'. For 200 amp, you will want a wire size 250 kcmil. Also 4/0 al @ 75 deg maxed out at 195a @ 150 ft will only have 5.8% voltage drop.

### Each Wire Size, Or Wire Gauge (Awg), Has A Maximum Current Limit That A Wire Can Handle Before Damage Occurs.

It’s also advised to increase your circuit breaker capacity to 175a if that’s the case to ensure safety. The rule of thumb for 100 amp is that you go with a wire size gauge 1. For a 70 amp, the safest wire size is a gauge 3.

### What Size Conduit Is Required For Underground Services?

100 amps #4 awg #2 awg: It is important to pick the correct size of wire so that the wire doesn't overheat. 10 gauge is generally used for appliances that produce 30 amps such as your washer and dryer.

### 8 Gauge Is Commonly Used For Large Appliances That Put Out A Maximum Of 40 Amps Of Circuit Power.

3/0 al @ 75 deg is good for 155a so that would work too and is a smaller wire. The neutral wire is often one or two sizes smaller than the two hots. He has a pretty good array.

### I Think It Accounts For 30%.

A sample of 120 volts, single phase, copper wire, 144 feet (one half of a 288 foot circuit) with 10 amps load on it yields a number 10 awg wire size. Enter the total amperage on the circuit; Enter the information below to calculate the appropriate wire size.