# How To Measure A Tablet Screen

How To Measure A Tablet Screen. A ruler is recommended as it won’t bend at an angle due to manual handling, thus reducing the chance of errors. Make sure you turn your tablet on and when the screen lights up, measure from one lit corner diagonally across to the other as shown above.

The tab 2 androids are heavier than the tab 3 androids. The earlier tab 2 series includes the ice cream sandwich operating system; No matter if you don’t remove the lcd panel from the lid, you have to measure the screen only.

### Width = (16/9) * 2.84 = 5.06.

Raised bezel measure the height (h) and width (w) of the screen's viewable area, making sure to measure within the bezel. For thickness measurements, hold the ruler alongside the edges, and you will get your thickness. The screen size calculator is here for you to calculate it right away.

### And While The Screen Still Has A Certain Measurement For Width And Height, The Proper Way To Measure A Screen Is From Top Left To Bottom Right, Measuring Just The Viewable Area Of The Display (E.g.

Width = ar * height. Multiply those to determine an area of 16.9 sq inches. If the screen is removed, you only need to measure the “glass” portion of it.

### The Larger Tablets Are 10 Inches And Above.

Area = 2.84 * 5.06 = 14.37 in². The tab 3 series includes the jelly bean operating system. How do you measure screen size on a tablet?

### The Samsung Galaxy Tab Devices Come In Three Display Screen Sizes:

Measure only the screen and not the bezel or the casing around the. The most important thing to remember here is that screen size is measured diagonally—corner to corner. Unfortunately, these numbers are seldom provided, but can usually be calculated by dividing the screen resolution measurements by the ppi density.

### The Earlier Tab 2 Series Includes The Ice Cream Sandwich Operating System;

The first thing to remember is that tablet size and tablet screen size are not the same thing. Ruler app for your phone and tablet. To measure the tablet diagonally you have to hold the ruler on the inner opposite points of the screen.